Technology and rules for using a self -adhesive film
First you need to start preparing the surface, along which our film will be distributed. The surface must be cleaned, as well as degreas. To degrease the surface, it must be treated using a dishwasher. The smooth surface must be moistened in water. The rough should be dried. Uneven surface – polished, covered with a primer. The existing cracks must be plunged.
The next step is represented by cutting a self -adhesive film. To do this, you can use a centimeter scale printed on the back of a self -adhesive film. Cutting should be made with a small stock of two to three centimeters. After everything is cut, it is necessary to carry out the film separation from the paper by about 5 cm. The glued part of the film should be smoothed with a soft towel. Smoothing is carried out to the edges of the film. In order to overlay the round edges, you need to use a manual hairdryer. The film heated with a hairdryer can be easily bent and glued behind the protruding edge. The gluing of the next canvas should be associated with its overlap according to the previous overlap.