Technology and stages of installation of plasters from drywall sheets
The layout of apartments does not always correspond to the desired and often there is a need to divide the room into two. Here, the construction of the drywall partition will come to the rescue. Making it is quite simple.
For installation, it will be necessary to have a profile, drywall, screws, insulation and dowels for quick installation. The thickness of the structure of the structure will determine the thickness of the walls of the profile. The distance of the CW Profil is determined by the material that will be issued this rebuild. Staining or gluing the wallpaper allows you to fix them at a distance of 60 centimeters, if it is planned to fix the tile, then the distance between the profiles should not exceed 30 centimeters. The thickness of the drywall sheets will be at least 12.5 millimeters. The height of the drywall sheets depends on the height of the ceilings. The profile is collected using self -tapping screws and metal drill.
It is advisable to choose insulation from mineral wool, do not forget about the thickness of the wall.
When the design from the guide profile is ready, CW profile is attached. It must be fixed from the calculation that the edges of the drywall will fall into their middle. The cladding of the frame begins, when fastening a sheet of drywall, it is necessary to trace that the joints of the sheets do not match.
Upon completion of these works, finishing coatings should be engaged in.