Door slopes arranging technologies
When installing door slopes, two main technologies are used. In one case, it is permissible to use ready -made slopes that are purchased in configuration to the door. In the second case, slopes are formed using dry mixtures. If you use ready -made door slopes, they are also called “inputs”, select them so that they coincide with the color of the door box as accurately as possible. Often such a selection is quite difficult to do. Without finding the necessary slopes in the store where you purchased doors, you can contact furniture workers. Now furniture manufacturers produce ready -made slopes from laminated chipboard, fiberboard or MDF in a wide range. You can choose the desired structure and shade. It remains only to make measurements correctly and correctly carry out installation, making the repair of the kitchen.
It is advisable to purchase a simple non -raised wood for door slopes, which will simply lead to the corresponding shade using a stain, transparent or tinted varnishes. Remember that only light wood is tinted – with the dark you cannot do anything. Fasten the finished slopes close to the door box using mounting foam or glue. In the first case, the voids formed during the installation of the door are filled with foam. In the second, the slope is attached to glue directly to the box. Before starting work, you should definitely glue the door box with painting tape, in order not to damage the surface with the tool or not to stain with glue. Doors canvas are tightened with a packaging film.