Technology and recommendations for laying laminate
To lay the laminate, you need to carefully prepare the base. The floor on which the laminate will be laid should be perfectly even, have no cracks, chips, bumps. The time for the further operation of the coating depends on the quality of preparation of the base for laying the laminate. After the laminate was bought in one of the construction stores, it should be adapted to the room in which it will be.
In order to organize waterproofing under the laminate, a plastic film should be laid under the coating, a plywood should be laid to ensure sound insulation. Put on the so -called “floating floor” this will ensure the future reliability of the coating. It is recommended to lay laminate, starting from the corner located to the left of the window, parallel to the falling sunlight. This styling allows you to reduce the visibility of the joints between the panels. Between the coating and the wall, you should definitely leave a gap of at least1.5 centimeters. The gap is fixed with a wooden peg. In order for the laminate to lie on the basis of firmly, it should be laid in a checkerboard pattern. Separate stripes can be fixed with each other, both with the help of glue and by means of a “lock” made in the panel housing.