Self -installation technology of a metal door
Currently, there are various types of doors, such as interior doors, metal, wooden, etc. D. In our article we will tell you about the installation of a metal door-firstly, protection against all thieves and scammers, and secondly, defiantly gives beauty to any apartment. First, the old door and the box are disassembled, then the exact size for the new door is measured. After that, retreat 2-3 cm. out and, using the level, make horizontal and vertical marks of the future opening. Then, along the labels of the label with a perforator, drill holes with a distance of three to four centimeters from each other. We knock out the doorway, while the edges should be as even as possible.
After that, the door must be inserted into the opening, aligned and fixed with wooden wedges. Drill holes under the dowel in places specifically for this intended. It is necessary to start from above, from the side of the loops.
We insert the dowels, screw the anchor screws with the washers, fix the door box.
When the anchor is fixed, the door must be checked – it should close it tightly, without effort, fit well to the door box. The mechanism of the latch should work easily. If necessary, the door must be adjusted.
Moisten the opening with a manual spray, fill the voids with mounting foam and wait for its drying.
The installation of doors is finished.