Building a house from foam blocks: Features
For the masonry to go successfully, smoothly and carefully stretch a special cord between them, it will help you for the evenness of the walls. You can adjust the placement of blocks with the so -called kiyanka with a special tire tanger. If you suddenly notice any irregularities, immediately correct them with a polished board. At the end of the masonry, all dust and dirt should be removed with a simple brush.
Often, when erecting the walls of the house, they forget about the fact that over time they can settle down and crack along the walls. To prevent this from happening, it is necessary to reinforce, that is, it is necessary to lay metal reinforcement around the entire perimeter of masonry in specially made stakes. They can be made by a grinder with a diameter of at least 40 mm
Then the stalks should be cleaned of dust, fill them with adhesive solution and put the prepared reinforcement there. Prut reinforcement should be 8 mm diameter. It lays between the first and second layer of masonry, and only then every four rows. If you carefully do this work, then in the future you can not worry about cracks.